TIGRA - TIGRA REVERS
For farms, for cutting grass and various kinds of runners. Maintenance of green areas.
Flail mower for grass and pruning up to Ø 2 cm.
A series of devices make it a multipurpose and professional mulcher.
Tractor linkage Cat. I
Oil sealed transmission with free wheel
Oil sealed transmission with double free wheel (REVERS)
Supporting slides height adjustable
Rotor bearings with double oscillating sphere
Electronically balanced rotor
Rotor diameter 127mm
Supporting roller with adjustable in height scraper
Roller diameter 194 mm
Rear removable hatch for maintenance
Cutting speed 45m/sec
High precision side shifting
Multi-aggressive rotor for orchard
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
SUPPORT ROTOR AND BEARING
Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.
Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.
SKID WITH WHEEL ANTI-CLOG PATENTED
Reason of distinction and pride, the wheel anti-clog of Tierre favors the continuity of work due to the fact that the prunings can no longer stand on the side of the forage harvester.
This detail allows the operator does not have to get off the tractor to release pruning waste, increasing productivity.
HYDRAULIC SIDE SHIFT AND 3-POINT HITCH
Hydraulic side shift controlled by the piston.
Equipped with two hoses with quick couplings that are connected to the hydraulic connections on the tractor.
Again, the type of movement is the most solid and robust that you can find in the market. In fact, is divided into two tubes in chromed steel C45, means that even in case of severe accidental impact this will absolutely indestructible.
Connections to the tractor are very close to the machine. This keeps the brush cutter in a position closer to the tractor, eliminating the risk of throwing stones towards the operator but above eliminates any problems caused because the machine is lifted, Thus, bringing the weight to the tractor, becomes overloaded to a lesser extent. This allows you to connect the machine even if high, also tractors with less mass and smaller weight.
The gearbox is made by COMER and is bathed in oil, as well as the extension.
The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for regulation height.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450°C