The folding flail mower AQUILA 640 is a heavy stalk chopper that can be used in corn, sunflower, straw and rice crops.
Suitable for processing large lands and for large companies, it is perfectly matched with tractors over 150 HP.
The rotor with a high number of tools, in which it is possible to mount both hammers or knives, allows a fast and clean cut and the internal HARDOX 450 double shell allows reduce wear on the machine, improving the investment.
The innovative body with 4 different discharge configurations reduces fuel consumption and improves working speed.
Tractor coupling Cat. 2 – Cat. 3
Oil sealed transmission with free wheel
Supporting slides heigh adjustable
Rotor bearings with double oscillating rollers
Electronically balanced rotor
Rotor diameter 219mm
Supporting roller with adjustable in height scraper
Roller diameter 194mm
Rear removable hatch for maintenance
Cutting speed 70 m/sec
Hydraulic and automatic safety closing for road transport
Rotor with a high number of tools
Heads with hydraulic leveling to the ground
The electronic balancing of the rotor of 2000 rpm, allows AQUILA an increase in performace up to 30% compared to the performance of a classic stalk chopper, reaching a full 70 m/sec of peripheral cutting speed.
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.
The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.
SUPPORT ROTOR AND BEARING
Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.
Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.
The gearbox is made by COMER and is bathed in oil, as well as the extension.
The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.
Pulleys electronically calibrated independently.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for regulazión height.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C