FLAILMOWER

PANTERA / PANTERA REVERS

Developed for professionals in agricultural work and heavy duty work, the PANTERA mower is a versatile mulcher that can face any kind of work.

It use ranges from cutting grass mulching runners and stalks.
Thanks to Tierre patents such as the double hammer and the variable attitude body shell, the PANTERA flailmower moves with agility over every type of ground.

The machine is predisposed to be used frontally on the most modern of tractors.
PANTERA is available in mechanically or hydraulically mobile versions with a 3 point, Category 2 and Category 3 connection.

Standard equipment includes the freewheel multiplier group and multiple configuration support roller.

STANDARD EQUIPMENTS:

  • Tractor linkage Cat. 2 / Cat. 3

  • Oil sealed transmission with free wheel

  • Oil sealed transmission with double free wheel (REVERS version)

  • Toothed belts

  • Rotor bearings with double oscillating balls

  • Electronically balanced rotor

  • Rotor diameter 194mm

  • Self-cleaning roller with double position/height adjustable scraper

  • Roller diameter 194mm

  • Rotor revolution speed 52m/s

  • Counter blade

  • Standard Revers predisposition

  • HARDOX wear plate

  1. Double rolling tun on rotor bearings

  2. Transmission XPB

PANTERA.png
PATENT PENDING.png

ADAPTIVE GEOMETRY

Impossible becomes simple.
A new concept of shredder able to change the shape of the cutting chamber up to 12 ways.
Each cutting configuration suits a different job that the machine can perform.

GEOMETRIA ADATTIVA.png

As a result, the same machine can be used in completely different working environments.
From mowing grass to pruning, or simply in the open field.
This is the TIERRE ADAPTIVE GEOMETRY patent, registered in 142 countries.

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

MAZZETTA.png

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

 

Main advantages:
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.

The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.

coltello a v.jpg
knives a tre.jpg

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

cuscinetto rotore.jpg
esploso albatros.jpg

TRANSMISSION

The gearbox is made by COMER and is bathed in oil, as well as the extension.

The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.

trasmissione 3.jpg

REAR ROLLER

The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.

The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.


The assembly is easily adjustable through holes for height regulation.

rullo posteroiore 1.png

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180°C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450°C.