PANTERA / PANTERA REVERS
Developed for professionals in agricultural work and heavy duty work, the PANTERA mower is a versatile mulcher that can face any kind of work.
It use ranges from cutting grass mulching runners and stalks.
Thanks to Tierre patents such as the double hammer and the variable attitude body shell, the PANTERA flailmower moves with agility over every type of ground.
The machine is predisposed to be used frontally on the most modern of tractors.
PANTERA is available in mechanically or hydraulically mobile versions with a 3 point, Category 2 and Category 3 connection.
Standard equipment includes the freewheel multiplier group and multiple configuration support roller.
Tractor linkage Cat. 2 / Cat. 3
Oil sealed transmission with free wheel
Oil sealed transmission with double free wheel (REVERS version)
Rotor bearings with double oscillating balls
Electronically balanced rotor
Rotor diameter 194mm
Self-cleaning roller with double position/height adjustable scraper
Roller diameter 194mm
Rotor revolution speed 52m/s
Standard Revers predisposition
HARDOX wear plate
Double rolling tun on rotor bearings
Impossible becomes simple.
A new concept of shredder able to change the shape of the cutting chamber up to 12 ways.
Each cutting configuration suits a different job that the machine can perform.
As a result, the same machine can be used in completely different working environments.
From mowing grass to pruning, or simply in the open field.
This is the TIERRE ADAPTIVE GEOMETRY patent, registered in 142 countries.
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.
The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for height regulation.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180°C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450°C.