OFFSET FLAIL MOWER
TCL DYNAMIC - TCL DYNAMIC SUPER
Designed for maintenance work on road sides and banks on farms, the TCL DYNAMIC mowers are multipurpose and professional mulchers that can be used to cut grass, runners and brambles.
Thanks to the external multiplier group on the “SUPER” version, this offsetting mower can go completely outside of the tractor’s tread, making it particularly suitable for roadside maintenance.
Finally, the TCL model mulchers can be equipped with the Terre exclusive “MULTIAGGRESSIVI”rotors, which assemble a large number of tools that are much more superior than traditional ones, enabling better weight distribution on the rotor, greater work speed and a finer cut product for better ground reabsorption.
The machines are equipped with a Cardan joint, self-levelling system, a freewheel multiplier group, and an adjustable self-cleaning support roller on slides.
Tractor linkage Cat.3
Oil sealed transmission with free wheel
Rotor bearings with double oscillating sphere
Electronically balanced rotor
Rotor diameter 127mm
Supporting roller with adjustable in height scraper
Roller diameter 194mm
Junction for self levelling on the ground
Cutting speed 45 m/sec
HARDOX double frame
Self-leveling on the ground fail mower
Impossible becomes simple.
A new concept of shredder able to change the shape of the cutting chamber up to 12 ways.
Each cutting configuration suits a different job that the machine can perform.
As a result, the same machine can be used in completely different working environments.
From mowing grass to pruning, or simply in the open field.
This is the TIERRE ADAPTIVE GEOMETRY patent, registered in 142 countries.
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
EXCLUSIVE MULTI AGGRESSIVE ROTOR
TCL Super can mount a special rotor built thanks to the experience of Tierre in crushing.
This rotor has the feature to mount the double of the tools with respect to a normal shredder allowing it to pulverize the material to be cut.
It was also balanced electronically.
It has an anchor welded to the rotor that measures 10 cm. can not be accidentally disconnected, even in cases of accidental impacts with stones and this ensures maximum operator safety.
SUPPORT ROTOR AND BEARING
Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.
Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.
The gearbox is made by COMER and is bathed in oil, as well as the extension.
The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.
Pulleys electronically calibrated independently.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for height regulation.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C