OFFSET FLAIL MOWER

TCL JUNIOR - TCL JUNIOR SUPER

Designed for maintenance work on road sides and the banks of small plots of land or in orchards, the TCL JUNIOR flailmower are the perfect machines for cutting grass, small runners and brambles.

​

The mulcher is equipped with double-edged hammers and an anti-clogging wheel, both Tierre patented, which enable facing even the most difficult maintenance work, which can occasionally arise.

 

Thanks to the external multiplier group on the “SUPER” version, it can go completely outside of the tractor’s tread, making it particularly suitable for roadside maintenance.

​

The machines are equipped with a Cardan joint, self-levelling system, a freewheel multiplier group, and an adjustable self-cleaning support roller on slides.

STANDARD EQUIPMENT:

  • Tractor linkage Cat.2

  • Oil sealed transmission with free wheel

  • Rest

  • Rotor bearings with double oscillating sphere

  • Electronically balanced rotor

  • Rotor diameter 127mm

  • Supporting roller with adjustable in height scraper

  • Roller diameter 134mm

  • P.T.O. shaft

  • Protecting carter

  • Cutting speed 45 m/sec

​

  1. Body with double unloading shape

  2. Rotor supports in monobloc casting

PDF

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

​

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

​

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

MAZZETTA.png
Watch the video

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

 

​

Main advantages:
• Knives Y, ideal for cutting and quickly discharge.

coltello a v.jpg

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

cuscinetto 1.png
cuscinetti esploso.png

ROMOVABLE BACK OVER

​

This crusher is equipped with detachable back cover so as to facilitate the cleaning and maintenance.

MOVING MACHINE

tabella spostamento tcl junior.png

Pulleys electronically calibrated independently

trasmissione 3.jpg

REAR ROLLER

​

The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.

​

The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.


The assembly is easily adjustable through holes for height regulation.

rullo posteroiore 1.png

PAINTING AND SPECIAL ZINC

​

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C