TCL JUNIOR - TCL JUNIOR SUPER

Conçues pour l’entretien des bords de routes, pour les rives et fossés, pour les petites aires cultivables et le broyage de l’émondage d’arbres fruitiers, les broyeurs TCL JUNIOR sont les machines idéales pour le broyage de l’herbe, des petits sarments et des ronces.

Les machines sont dotées de petits marteaux à double tranchant et d’une roue anti-engouffrement brevetés par TIERRE ; ceci consent d’affronter l’entretien le plus dur qui puisse se présenter.

Les machines sont fournies de série du cardan, d’un système d’auto – nivellement du terrain, d’un boîtier de transmission à roue libre et d’un rouleau d’appui autonettoyant réglable sur patins.

EQUIPEMENT STANDARD:

  • Attelage tracteur Cat.2

  • Transmission bain d’huile avec roue libre

  • Patins d’appui réglables en hauteur

  • Pieds d’appui

  • Roulements rotor à double sphère oscillante

  • Rotor équilibré électroniquement

  • Diamètre rotor 127mm

  • Rouleau d’appui avec décrottoir réglable en hauteur

  • Diamètre rouleau 134mm

  • Cardan

  • Protection carter

  • Vitesse de coupe 45m/sec

  1. Châssis à double configuration de déchargement

  2. Supports rotor en coulée monobloc

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

 

Main advantages:
• Knives Y, ideal for cutting and quickly discharge.

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

SKID WITH WHEEL ANTI-CLOG PATENTED

 

Reason of distinction and pride, the wheel anti-clog of Tierre favors the continuity of work due to the fact that the prunings can no longer stand on the side of the forage harvester.

This detail allows the operator does not have to get off the tractor to release pruning waste, increasing productivity.

ROMOVABLE BACK OVER

This crusher is equipped with detachable back cover so as to facilitate the cleaning and maintenance.

MOVING MACHINE

Pulleys electronically calibrated independently

REAR ROLLER

The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.

The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.


The assembly is easily adjustable through holes for height regulation.

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C

ico1-80x80.png
ico2-80x80.png
ico3-80x80.png
ico4-80x80.png

PART

TIERRE GROUP SRL

Via Valsugana, 24
35010 Curtarolo (PD) Italy
C.F. e P.IVA IT 0389 1060281

CONTACTS

Phone +39 049 9620631
Fax +39 049 557139

commerciale@tierreonline.com
REA 345 184
Nominal capital € 100.000 

LINKS