OFFSET FLAIL MOWER
TCL JUNIOR - TCL JUNIOR SUPER
Designed for maintenance work on road sides and the banks of small plots of land or in orchards, the TCL JUNIOR flailmower are the perfect machines for cutting grass, small runners and brambles.
Thanks to the external multiplier group on the “SUPER” version, it can go completely outside of the tractor’s tread, making it particularly suitable for roadside maintenance.
The machines are equipped with a Cardan joint, self-levelling system, a freewheel multiplier group, and an adjustable self-cleaning support roller on slides.
Tractor linkage Cat.2
Oil sealed transmission with free wheel
Rotor bearings with double oscillating sphere
Electronically balanced rotor
Rotor diameter 127mm
Supporting roller with adjustable in height scraper
Roller diameter 134mm
Cutting speed 45 m/sec
Body with double unloading shape
Rotor supports in monobloc casting
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
ROMOVABLE BACK OVER
This crusher is equipped with detachable back cover so as to facilitate the cleaning and maintenance.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for height regulation.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C