TCL MASTER

Développée pour les professionnels des travaux agricoles, comme les sous-traitants, le broyeur TCL MASTER est une machine robuste et versatile à même d’affronter tous les types de travaux. Idéale pour l’entretien des bords de routes, des rives et des fossés où l’on peut trouver des ronces ou des buissons, le broyeur peut être employé aussi en tant que broyeur de sarments ou broyeur de tiges.

Grâce aux brevets TIERRE comme le petits marteaux à double tranchant et la roue anti – engouffrement, le broyeur TCL MASTER affronte sans difficultés aucunes les conditions de travail les plus extrêmes.

EQUIPEMENT STANDARD:

  • Attelage tracteur – Cat. 3

  • Trasmission a bain d'huile avec roue libre

  • Patins d'appui réglables en hauteur

  • Courroies dentées

  • Roulements rotor à double rouleau oscillant

  • Rotor équilibré électroniquement

  • Diamètre rotor 194mm

  • Rouleau d'appui avec décrottoir réglable en hauteur

  • Diamètre rouleau 194mm

  • Vitesse de coupe 52 m/sec

  • Amortisseur sur attelage 2éme point avec système de blocage

  • Accomulateur hydraulique au contrôle agle de travail

  1. Rotor à haute résistance

  2. Marteau à double tranchant - brevet TIERRE

  3. Double châssis en HARDOX

ADAPTIVE GEOMETRY

Impossible becomes simple.
A new concept of shredder able to change the shape of the cutting chamber up to 12 ways.
Each cutting configuration suits a different job that the machine can perform.

As a result, the same machine can be used in completely different working environments.
From mowing grass to pruning, or simply in the open field.
This is the TIERRE ADAPTIVE GEOMETRY patent, registered in 142 countries.

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

 

Main advantages:
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.


The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

MOVING MACHINE

SKID WITH WHEEL ANTI-CLOG PATENTED

Reason of distinction and pride, the wheel anti-clog of Tierre favors the continuity of work due to the fact that the prunings can no longer stand on the side of the forage harvester.


This detail allows the operator does not have to get off the tractor to release pruning waste, increasing productivity.

TRANSMISSION

The gearbox is made by COMER and is bathed in oil, as well as the extension.

The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.

Pulleys electronically calibrated independently

REAR ROLLER

The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.

The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.


The assembly is easily adjustable through holes for regulazión height.

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C

ico1-80x80.png
ico2-80x80.png
ico3-80x80.png
ico4-80x80.png

PART

TIERRE GROUP SRL

Via Valsugana, 24
35010 Curtarolo (PD) Italy
C.F. e P.IVA IT 0389 1060281

CONTACTS

Phone +39 049 9620631
Fax +39 049 557139

commerciale@tierreonline.com
REA 345 184
Nominal capital € 100.000 

LINKS