OFFSET FLAIL MOWER
TCL PRO 230
Designed for maintenance work on road sides and banks on farms, cuts grass, runners and brambles. Offsetting flailmower for grass and pruning up to Ø 8 cm.
The machine is equipped with double-edged hammers and an anti-clogging wheel, both Tierre patented, which enable facing even the most difficult maintenance work, which can occasionally arise.
Thanks to the external multiplier group on the “PRO” version, the mulcher can go completely outside of the tractor’s tread, making it particularly suitable for roadside maintenance.
Tractor coupling cat. 3
Oil bath transmission with free wheel
Rotor bearings with double oscillating balls
Electronically balanced rotor
Rotor diameter 159 mm
Rear roller with height adjustable scraper
Roller diameter 194mm
Articulated joint for self levelling to the ground
Cutting speed 48m/sec
Double cutting hammer - TIERRE patent
Body with high output
Impossible becomes simple.
A new concept of shredder able to change the shape of the cutting chamber up to 12 ways.
Each cutting configuration suits a different job that the machine can perform.
As a result, the same machine can be used in completely different working environments.
From mowing grass to pruning, or simply in the open field.
This is the TIERRE ADAPTIVE GEOMETRY patent, registered in 142 countries.
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.
The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.
SKID WITH WHEEL ANTI-CLOG PATENTED
Reason of distinction and pride, the wheel anti-clog of Tierre favors the continuity of work due to the fact that the prunings can no longer stand on the side of the forage harvester.
This detail allows the operator does not have to get off the tractor to release pruning waste, increasing productivity.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for regulazión height.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C