STALK MULCHER

ALBATROS

2.jpg

The ALBATROS crushing mulcher is the ideal stalk shredder for cutting grass and bushes and for the maintenance of large green areas and uncultivated land.

Multipurpose and robust, it guarantees high work productivity with tractors with both front and rear power take-off.

ALBATROS in combination with PANTERA, positioned frontally, allows for very varied work thanks to its versatile and sturdy body shells.

The special shape of the chopper allows it to be used even with medium-power tractors.

STANDARD EQUIPMENT:

  • Tractor linkage Cat. 3

  • Oil sealed transmission with free wheel

  • Supporting slides height adjustable

  • Toothed belts

  • Rotor bearings with double oscillating roller

  • Electronically balanced rotor

  • Rotor diameter 194mm

  • Self cleaning supporting roller adjustable in height

  • Roller diameter 194mm

  • Rear removable hatch for maintenance

  • Cutting speed 52 m/sec

  • Hydraulic and automatic safety closure for road transport

  1. Floating heads

  2. Roller with double unloading position

ALBATROS.png
PATENT PENDING.png

ADAPTIVE GEOMETRY

Impossible becomes simple.
A new concept of shredder able to change the shape of the cutting chamber up to 12 ways.
Each cutting configuration suits a different job that the machine can perform.

GEOMETRIA ADATTIVA.png

As a result, the same machine can be used in completely different working environments.
From mowing grass to pruning, or simply in the open field.
This is the TIERRE ADAPTIVE GEOMETRY patent, registered in 142 countries.

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

MAZZETTA.png

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

 

Main advantages:

• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.

The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.

coltello a v.jpg
knives a tre.jpg

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

cuscinetto rotore.jpg
esploso albatros.jpg

ROLLER VERSATILE USE

The roller can be placed internally so that facilitates discharging grass on dry land.
The roller can be placed internally so that facilitates discharging grass in wetlands...

albatros uso versatile del rullo.jpg

WHEELED USE

It is possible to provide the ALBATROS 4 pivoting wheels adjustable height millimeter way.

The application is suitable on uneven terrain.

trinciastocchi-albatros-ruote-tierre-1.j
trinciastocchi-albatros-ruote-tierre-2.j

TRANSMISSION

The gearbox is made by COMER and is bathed in oil, as well as the extension.

The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.

trasmissione 2.jpg
trasmissione 3.jpg

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C