HEAVY STALK MULCHER
LEONA, is a stalk mulcher, the answer to the intensive processing needs of farmers working on large areas, in the most difficult and heavy conditions. An heavy duty shredder for corn, straw, soy, grass, beetroot and set aside stalks.
LEONA also represents a solution for farmers and contractors active in international markets such as Ukraine, the United States, South America, Australia and South-East Asia. In these countries the cultivation of rice and cotton require shredding operations which involve a very high abrasion of the sheet.
An innovative reworking of the double body, allows to easily change the exhaust configuration so as to obtain maximum versatility. Furthermore the double shell is covered in HARDOX 450, Swedish steel, characterized by hardness, resistance and tenacity, which extends the life of the equipment and consequently a growth in productivity and savings.
These features ensure that your investment will retain its value over time.
Tractor linkage Cat. 2
Oil sealed transmission with free wheel
Rotor bearings with double oscillating roller
Electronically balanced rotor
Rotor diameter 219 mm
Supporting roller with adjustable in height scraper
Roller diameter 194 mm
Rear removable hatch for maintenance
Cutting speed 70m/sec
Roller with double unloading position
Body with high output
The electronic balancing of the rotor of 2000 rpm, allows AQUILA an increase in performace up to 30% compared to the performance of a classic stalk chopper, reaching a full 70 m/sec of peripheral cutting speed.
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.
The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.
SUPPORT ROTOR AND BEARING
Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.
Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.
The gearbox is made by COMER and is bathed in oil, as well as the extension.
The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.
The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.
The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.
The assembly is easily adjustable through holes for regulazión height.
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180°C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450°C.