FLAILMOWER

PANDA CL

fronte panda cl.png

The PANDA CL model is designed and manufactured for the maintenance of vegetable crops. Thanks to the PANDA CL, removing leaves from carrots, beets, etc. is possible.

The mulched material is expelled from the sides of the machine by means of an Archimedean screw, leaving the field clean.


The flailmower is available in the fixed version with three-point connection, the mechanically mobile version with three-point connection, the screw with a crank one, or with hydraulic movement. Furthermore, a third stabilizing wheel can be added (optional).

The standard equipment includes a freewheel multiplier group, two fixed wheels and a back hood that can be opened.

STANDARD EQUIPMENT:

  • Tractor linkage Cat.1

  • Oil sealed transmission with free wheel

  • Supperting slides height adjustable

  • Toothed belts

  • Rotor bearings with double oscillating sphere

  • Electronically balanced rotor

  • Rotor diameter 127mm

  • Supporting roller with adjustable in height scraper

  • Roller diameter 134mm

  • Rear removable hatch for maintenance

  • Cutting speed 45m/sec

  • Counter blade

retro panda cl.png

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

MAZZETTA.png

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

cuscinetti esploso.png
cuscinetto 1.png

TRANSMISSION

The gearbox is made by COMER and is bathed in oil, as well as the extension.

The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.

trasmissione 2.jpg
trasmissione 1.jpg
trasmissione 3.jpg

GREASING POINT

This machine is equipped with a wide range of grease points so that is always efficient.

greasing point.jpg
greasing point 2.jpg

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C