LUPO - LUPO REVERS
Our LUPO shredder is the ideal machine to cut grass and little diameter pruning; it has been studied for compact tractors.
It is a multipurpose and professional machine thanks to a series of special devices.
The first distinctive element of this shredder is the particular shape of the frame which allows to use it with the self cleaning roller or with the roller with scrapper.
When using the machine with the self cleaning roller it is able to cut very high grass without any kind of slowdown.
When using the machine with roller with scrapper it is able to work during wet winters to hash pruning avoiding that mud fixes onto the roller and limits the work.
LUPO originates with the predisposition for tractors with reversible drive. This allows, with a minimum expense, to go on using the same machine even if the user decides to change the tractor.
The rotor equipped with helical tools assures high cutting speed with little request of work power.
The standard equipment provides the gear box with free wheel, the self cleaning rear roller adjustable in high and the side skids adjustable in high and interchangeable.
The shredder LUPO model is available with mechanical displacement or with hydraulic one.
Tractor coupling Cat.1
Transmission in oil bath with free wheel
Oscillating rotor bearings
Electronically balanced rotor
Rotor diameter 114 mm
Self cleaning roller
Roller with scrapper adjustable in high
Roller diameter 134 mm
Cutting speed 45 m/sec
Body with double unloading shape
Ready for hydraulic motor conversion
HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED
double cutting surface both horizontally and vertically
low drag, less fuel consumption
greater impact resistance against rocks and stony bodies due to the particular shape of the neck
The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made of boron steel.
POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.
The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.
EXCLUSIVE MULTI AGGRESSIVE ROTOR
TCL Super can mount a special rotor built thanks to the experience of Tierre in crushing.
This rotor has the feature to mount the double of the tools with respect to a normal shredder allowing it to pulverize the material to be cut.
It was also balanced electronically.
It has an anchor welded to the rotor that measures 10 cm. can not be accidentally disconnected, even in cases of accidental impacts with stones and this ensures maximum operator safety.
SUPPORT ROTOR AND BEARING
Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.
Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.
The gearbox is made by COMER and is bathed in oil, as well as the extension.
The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.
Pulleys electronically calibrated independently
PAINTING AND SPECIAL ZINC
Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C